SIMUFLY.COM Discussion Forums

SIMUFLY.COM Discussion Forums
http://www.simufly.com/cgi-bin/yabb2/YaBB.pl
Delco Carousel IV-A INS For Microsoft Flight Simulator >> Delco Carousel IV-A INS For Microsoft Flight Simulator >> CS 707 always wants to fly north
http://www.simufly.com/cgi-bin/yabb2/YaBB.pl?num=1485814634

Message started by ikedaman on Jan 30^th, 2017, 10:17pm

Title: CS 707 always wants to fly north
Post by ikedaman on Jan 30^th, 2017, 10:17pm

i was finally able to get CIVA INS working on KOLM to KSEA after realizing that NavSingleMode button was basically invisible and made it big enough to click on. it worked really well.
so then i tried a couple of flights from KMCI to KSTL and from KSTL to KMCI following exact same procedure but CS 707 just flies north no matter what i do. finally gave up and went back to KOLM to KSEA.
have no idea what the difference is. loading flights thru ADEU .AWC files with no errors and checking lat/lon and distances before flight.

Title: Re: CS 707 always wants to fly north
Post by Peter Rabbit on Jan 31^st, 2017, 12:51pm

Have you tried tried telling the INS to fly direct to your first/next waypoint........ WY PT CHG/0/1*/INSERT (* or whichever number your next waypoint is)

Is the AUTO/MAN switch set to AUTO ?

Title: Re: CS 707 always wants to fly north
Post by ikedaman on Jan 31^st, 2017, 2:02pm

yes i set it to 1-2 because as per manuals 0-1 is same (ground position) to check that it is 0 miles.
CIVA mode select is on AUTO but have tried MAN just to force it.
also use XTK/TKE to manually fly which is quite accurate and doable.
DME updating is working too - green flag til VOR is out of range.
i am going to revisit this in a couple of days - i just found a post (captainsim.org) about the default doppler flight plan loading (KSEA-KSFF) every time you load CS 707 Captain which explains the let's go north attitude.

http://www.captainsim.org/cgi-bin/yabb2/YaBB.pl?num=1337690731/2#2

but it seems to me (and this works if i use DNS) you simply override that with the CIVA as any flight plan can be overridden thru use of autopilot or hand flying. to me CIVA and DNS are just another form of autopilot.

Title: Re: CS 707 always wants to fly north
Post by Peter Rabbit on Feb 1^st, 2017, 12:05am

Ok, sounds like a CS707 issue.

BTW .... 0 is always your present position, so if you wish to fly direct to a waypoint you would always use 0-1 or 0-2

Title: Re: CS 707 always wants to fly north
Post by ikedaman on Feb 1^st, 2017, 3:08pm

problem solved - it is the aircraft not fsx or CIVA.
i installed the CIVA in a Piper Meridian (randomly picked) and flew my .awc files from KOLM-KSEA, KMCI-KSTL and KSTL-KMCI and it worked flawlessy (except for the increasing API).
when using the CS 707 Captain if you go to world..map and zoom out you will see that the default Doppler Navigation flight plan (KSEA-KSFF) is being loaded every time you use the CS707 and the autopilot in nav or hdg will head north for KSEA or KSFF - i'm not sure which is the departure and which is the destination.
when i switch to fs2004 i will install the CIVA in the Legendary 707 which does not have Doppler Navigation and see what happens. it is my understanding that this gauge was developed for fs2004 in the first place.

Title: Re: CS 707 always wants to fly north
Post by Marco Ravanello on Feb 4^th, 2017, 12:40pm

I'd check CS forums.

Yes, CIVA was originally developed for FS2004, then made compatible with newer FS versions, including P3D.