SIMUFLY.COM Discussion Forums

SIMUFLY.COM Discussion Forums
https://www.simufly.com/cgi-bin/yabb2/YaBB.pl
Delco Carousel IV-A INS For Microsoft Flight Simulator >> Delco Carousel IV-A INS For Microsoft Flight Simulator >> Unable to enter second half of present location
https://www.simufly.com/cgi-bin/yabb2/YaBB.pl?num=1195627843

Message started by johncantwell on Nov 21^st, 2007, 6:50am

Title: Unable to enter second half of present location
Post by johncantwell on Nov 21^st, 2007, 6:50am

Need some help guys... I can't get the CDUs to accept the second part of my present location during setup.

I've just installed the gauges with no problems, and set up the default 737-400 panel. The aircraft and panel load fine. I'm trying to work through the tutorial flight KBOS-KMIA. Sitting at the gate in KBOS, I've turned the three MSU to standby, checked for malfunction codes, checked the ID (11 17) in all three CDUs, checked the TEST button, with all being OK as per the tutorial.

I've then turned the CDU selectors to POS to insert the present location. I've used SHIFT+Z to get my position, N 42 21.6 W 71 01.1 (gate B18). As instructed, I've pressed W 4 2 2 1 6 INSERT (which then extinguishes) but then the keypad will not allow any other entries. It's as though it has stopped recognizing inputs. I've tried using Keyboard Capture Mode (using my PC's keyboard) with the same result. I've tried shutting down the flight, and the whole FS9, but the problem is the same. I can enter the first half of the location, but that's it. I then get a WARN light on CDU #1 but none of the others.

I've noticed that after entering the first part of the location (W 4 2 2 1 6) the first time I click on INSERT nothing happens, when I press it a second time the INSERT light goes out. The problem is the same with either engines running or shut down.

Any suggestions? Is there any way to purge the system and start over (the entered digits remain in the system even after rebooting FS9).

John
Australia

Title: Re: Unable to enter second half of present locatio
Post by Siberier on Nov 21^st, 2007, 7:50am

Hi!
Try to use keyboard entering. This your actions after you set CDU to POS:

- enter LON. N42216

-press "enter" button on your add keybord in NUM zone

- enter your LAN. W071011

- press "enter" button on your add keybord in NUM zone

That's all. this actions should to help you.

Title: Re: Unable to enter second half of present locatio
Post by johncantwell on Nov 21^st, 2007, 9:37am

Hi Siberier!

Thanks, problem solved!

I was making the mistake of expecting the INSERT light to extinguish when I pressed it after the first part of the lat/long entry. When I just kept going with the longitude digits after one press of the INSERT button, it all worked, with the INSERT light going out after the second press, after the longitude entry.

I spent hours trying to sort this out, even installing the gauges on a different PC! What a dummy! :-[

Many thanks :)
John
Australia

Title: Re: Unable to enter second half of present locatio
Post by Lan767 on Feb 19^th, 2008, 7:36pm

Hi John

I am having the same problem with CDU's not accepting the second part of my present location. I've tried the Keyboard Capture Mode without success also. I have seen Siberiers reply to you about keyboard entering. I thought the Keyboard Capture Mode, was the only other method of entering the figures using the keyboard. Sorry, I am a bit new to all this, but I could not understand how you enter the figures using the keyboard, without using Keyboard Capture Mode.

Help!!! My plane looks great on the ground. I would rather be in the air

Lan767

Title: Re: Unable to enter second half of present locatio
Post by Marco Ravanello on Feb 20^th, 2008, 8:58am

Entering data with the mouse or using keyboard does not make any difference, the key sequence/procedure is exactly the same:

CDU DataSelector on POS
Type in LAT
Press INSERT (only ONCE!!, INSERT remains illuminated)
Type in LON
Press INSERT (INSERT light goes out)
CDU DataSelector DSRTK/STS
Monitor Right Data display for Errors and clear them as required.

Regards
Marco

Title: Re: Unable to enter second half of present locatio
Post by Lan767 on Feb 20^th, 2008, 11:48pm

Hi Marco

Silly me, I got it. Problem solved

Thanks

LAN767 ;D