SIMUFLY.COM Discussion Forums

SIMUFLY.COM Discussion Forums
https://www.simufly.com/cgi-bin/yabb2/YaBB.pl
Delco Carousel IV-A INS For Microsoft Flight Simulator >> Delco Carousel IV-A INS For Microsoft Flight Simulator >> ADEU Panel not opening, need help
https://www.simufly.com/cgi-bin/yabb2/YaBB.pl?num=1205522067

Message started by Herbie on Mar 14^th, 2008, 7:14pm

Title: ADEU Panel not opening, need help
Post by Herbie on Mar 14^th, 2008, 7:14pm

Hi! Civa installed in MS FS9 B737-400, File: EDDH-EDDL 23-1.AWC in Civa/ADEU folder. Plane at EDDH parking, align, MDU in Navi, Ins set to: WAYpoint. Left Clicking on INS updating light, nothing show No ADEU Units. Herb Modify: Her is my Panel Conf. Panel #8 for the INS
[window08]
file=insback
size_mm=330,260
position=8
visible=0
ident=41

gauge00=../CIVA/INS!CDU1,01,0,165
gauge01=../CIVA/INS!navmodetriple,01,132,80
gauge02=../CIVA/INS!CDU2,165,0,165
gauge03=../CIVA/INS!CDU3,83,132,165
gauge04=../CIVA/INS!updateflags,248,132,80,50
gauge05=../CIVA/INS!batparallel,248,182,50,78
----------------------------------------------------
-----------------------------------------------------
This here below: I found on the website. I Do Not have those entries in my Panel Configuration file B737-400. I have the SST Concord also. That plane got the slots for the .WAC files installed. Need help. Herb

gauge13=../Civa/Ins!Adeu1, 421,134, 164, 60
gauge14=../Civa/Ins!Adeu2, 421,195, 164, 60

Title: Re: ADEU Panel not opening, need help
Post by Marco Ravanello on Mar 15^th, 2008, 10:50am

You are right, among all sample panel.cfg provided, only the LearJet panels include the ADEU gauge. This is because ADEU was added much later and we only "patched" the LearJet panel for testing it.

SSTSIM should support ADEUs, maybe you need the latest patch, I don't know, I'd suggest you to check SSTSIM forum.

To add ADEUS try adding the following section (as window09 or whatever):

[Window09]
size_mm=328,60
background_color=16,16,16
position=8
visible=0
ident=43

gauge00=../civa/ins!Adeu1, 0, 0, 164, 60
gauge01=../civa/ins!Adeu2, 164, 0, 164, 60

Regards
Marco

Title: Re: ADEU Panel not opening, need help
Post by Herbie on Mar 15^th, 2008, 6:16pm

Hello Marco!
Thank you for your answer! I just using the B737 to get familar with Civa INS and Adeu. The SST Concord is all working fine. I did said: the plane got the slots in the Ins-panel. I will change over to the Lear-jet to learn Adeu. Best Regards, Herb

Title: Re: ADEU Panel not opening, need help
Post by Marco Ravanello on Mar 16^th, 2008, 12:17am

That 737 panel has been designed to be used for the tutorial flight. Being it a tutorial I always suggest NOT to use ADEU, but to use the CDU in "full manual mode" to learn how the INS has to be managed.

> the plane got the slots in the Ins-panel

could you clarify please?

> I will change over to the Lear-jet to learn Adeu

Oh, ADEU usage is extremely simple, you will not need much practicing.

Have a good flight!

Regards
Marco

Title: Re: ADEU Panel not opening, need help
Post by Herbie on Mar 16^th, 2008, 6:20pm

Hello Marco!
You are right about ADEU, had a flight from EDDH/EDDL Hamburg/Dortmund no problem with Adeu. I will go back to the b737 again. Learn more about in flight update, entering Coordinates by hand is also good for my Brain. Keep Alzheimer's away, I hope. Thank you for your help. Best Regards, Herb