SIMUFLY.COM Discussion Forums

SIMUFLY.COM Discussion Forums
https://www.simufly.com/cgi-bin/yabb2/YaBB.pl
Delco Carousel IV-A INS For Microsoft Flight Simulator >> Delco Carousel IV-A INS For Microsoft Flight Simulator >> 06-41 error
https://www.simufly.com/cgi-bin/yabb2/YaBB.pl?num=1251011981

Message started by Kvaksa on Aug 23^rd, 2009, 8:19am

Title: 06-41 error
Post by Kvaksa on Aug 23^rd, 2009, 8:19am

Hi !
When i'm open INS (version 151) on different crafts (fsx, fs2004) and switch MSU selector to STBY and CDU selector to POS I'm read ramp coordinates (shift+z) and INSRTING latitude but longitude do not insert
When i'm push on button 4(w) or 6(e) nothing occurs and error light is on Errof is 06-41 Then i'm switch MSU selector to OFF and then STBY
but error 06-41 again and again and again.
How decide a problem ?

Title: Re: 06-41 error
Post by Gianfranco Corrias on Aug 23^rd, 2009, 11:31am

Hi,
as written in FS/CIVA/DOCS/ACTION AND MALFUNCTION CODES the code 06-41 appears when the inserted present position differs more than 3NM from the parking position where the plane arrived in the precedent flight.
In the realty hardly ever the plane changes parking gate during the stops in the transit airports and, on the other hand,the tolerance of 3NM is quite enough to cover all plane movements in almost all world airports.
But within FS simmers change flight at every session and almost always the Departure gate position differs more than 3NM from the precedent arrival gate position.
Don't consider 06-41 as an error but as a warning and it can be cleared clicking over the TEST INS button as required.
If you're departing from the same gate where you arrived in the precedent session and 06-41 codes appear, give a look at the inserted gate position maybe you've made an unintentional insertion mistake.
Regards Gianfranco