|
SIMUFLY.COM Discussion Forums
https://www.simufly.com/cgi-bin/yabb2/YaBB.pl Delco Carousel IV-A INS For Microsoft Flight Simulator >> Delco Carousel IV-A INS For Microsoft Flight Simulator >> Need help from the developers https://www.simufly.com/cgi-bin/yabb2/YaBB.pl?num=1315269308 Message started by mark767 on Sep 6th, 2011, 1:35am |
|
Title: Need help from the developers Post by mark767 on Sep 6th, 2011, 1:35am Guys, Really looking for some assistance. I cannot get the keyboard input mode to work with the CIVA INS. I have been using the product for many years but only have this problem now with my new computer. Windows 7 64bit OS. SP1 installed. DirectX is up to date. Please advise what I need to do to get this working, thanks! Really challenging flying the ConcordeX without keyboard input. regards, Mark. |
|
Title: Re: Need help from the developers Post by mark767 on Sep 7th, 2011, 1:15am I did a bit more testing tonight and can confirm that when clicking the keyboard input clickspot that my number keys no longer work with other programs like Ezdok, however, nothing will show in the INS. Other buttons like CTRL-Z still work in this mode and I am guessing that is normal as these keys have nothing to do with the INS. When I click the clickspot again and the yellow light goes out then I get my regular keyboard assignments back. Mark. |
|
Title: Re: Need help from the developers Post by Gianfranco Corrias on Sep 9th, 2011, 9:38am I have windows7 64bit and everything is working great. Try to open the START menù than right click on Flight simulator click on Properties\compatibility set the windows7 as operative system and check the box of "run this program in compatibility mode for windows7". Gianfranco |
|
Title: Re: Need help from the developers Post by mark767 on Sep 9th, 2011, 4:49pm Thanks very much, I will try and get back to you. Mark. |
|
Title: Re: Need help from the developers Post by mark767 on Sep 10th, 2011, 1:13pm Gianfranco, I followed your instructions but still did not work. Do you want me to install the debug guage and send you the data? Mark. |
|
Title: Re: Need help from the developers Post by mark767 on Sep 11th, 2011, 4:19pm Some more informaiton: another pilot on the FlightSimLabs forums has confirmed that you can have EZDok installed and still use the keyboard input on the CIVA INS. I am just wondering if this is related to the install order of the program in the simconnect folder? I remember there was some issue like this with the Level D 767. Just guessing here.... Mark. |
|
Title: Re: Need help from the developers Post by mark767 on Sep 11th, 2011, 4:51pm I just tried it with the default Learjet and the sample panel but still did not work. Also just reinstalled, ran as admin in Windows 7 compatability mode and it did not work. I think there is something in my Windows7 setup that is missing. So lets start with basics: What version of DirectX do I need installed? What version (if any) of MS Net Framework do I need installed ? Are there any dependent services for the CIVA Gauge? I have disabled a few of them. thanks, that should be a good start. Mark. |
|
Title: Re: Need help from the developers Post by Gianfranco Corrias on Sep 11th, 2011, 6:12pm Where do you click to enter the Keyboard mode?I'm posing you this question because the light of Keyboard mode is green and not yellow as you said in your posts. |
|
Title: Re: Need help from the developers Post by mark767 on Sep 11th, 2011, 10:24pm I am clicking in the top left corner. I am using with ConcordeX and the light is a green square. I did try with the default Lear Jet using the example panel.cfg and in that plane yes it was green but still did not work. Mark. |
|
Title: Re: Need help from the developers Post by mark767 on Sep 12th, 2011, 11:26am CORRECTION I am clicking in the top left corner. I am using with ConcordeX and the light is a YELLOW square. I did try with the default Lear Jet using the example panel.cfg and in that plane yes it was green but still did not work. |
|
Title: Re: Need help from the developers Post by Gianfranco Corrias on Sep 12th, 2011, 6:24pm CDU top left corner?A yellow led isn't Civa INS feature.The expected keyboard mode led within civa ins program is ONLY green. Post your concordeX panel .cfg. Gianfranco |
|
Title: Re: Need help from the developers Post by mark767 on Sep 13th, 2011, 12:05pm As requested here is the panel.cfg. I think the developers have modified the green light to a yellow square but other than that everything else is the same. Please note that this did work properly on my old computer. Mark. //Flight Sim Labs Concorde-X Panel //Copyright Flight Sim Labs, Ltd. 2009-2010 // // CAPTAIN'S VIEWPOINT // // 4:3 - Regular Screen panel // // NOTE: // // Engineer Panel sizes are calculated based on the window size of the lower fuel panel. // The ratios used are according to the Engineer Panel composition found in the Engineer // popup window. [Window Titles] Window00=Computers Panel Window01=Captain Main Panel Window02=Aft Overhead Panel Window03=Fwd Overhead Panel Window05=Upper/Throttle Pedestal Panel Window06=Lower Pedestal Panel Window07=DC Electrics Panel Window08=AC Electrics Panel Window09=Lower Fuel Panel Window10=Upper Fuel Panel Window11=Hydraulics Panel Window12=Air Bleed Panel Window13=Temperature Control Panel Window14=Engine Control Panel Window15=Secondary Engine Instruments Panel Window16=Air Intakes Panel Window17=Fwd Leg Panel Window18=Aft Leg Panel Window19=Nozzle Override Panel Window20=Brake Control Panel Window21=Cabin Pressure Panel Window25=EO Lights Panel Window26=Captain Lights Panel Window27=FO Lights Panel Window30=Popup Engine Stack Window35=CDU1 Popup Window36=CDU2 Popup Window40=Popup Engineer Panel Window50=Mini Controls Panel Window60=Master Warning Panel Window61=Visor Panel Window62=Centre Post Panel Window63=Controller Panel [VIEWS] VIEW_FORWARD_WINDOWS=0 //VIEW_FORWARD_DIR=3.000, 0.000, -0.400 VIEW_FORWARD_ZOOM=0.80 //-------------------------------------------------------- ///////////////////////// // System Computers Panel ///////////////////////// [Window00] BACKGROUND_COLOR=0,0,0 size_mm=1600,10 position=6 visible=1 nomenu=1 render_3d_window=0 ident=MAIN_PANEL // Name is important: Do *not* rename EngineData gauge // (needs to come before everything for OnFSReady()) gauge00=FSL_ConcX!AA_EngineData, 0, 0, 0, 0 gauge01=FSL_ConcX!PitotTube_LH, 0, 0, 0, 0 gauge02=FSL_ConcX!PitotTube_RH, 0, 0, 0, 0 gauge03=FSL_ConcX!PitotTube_NS, 0, 0, 0, 0 gauge04=FSL_ConcX!StaticPort_LH, 0, 0, 0, 0 gauge05=FSL_ConcX!StaticPort_RH, 0, 0, 0, 0 gauge06=FSL_ConcX!StaticPort_NS, 0, 0, 0, 0 gauge07=FSL_ConcX!ADC1, 0, 0, 0, 0 gauge08=FSL_ConcX!ADC2, 0, 0, 0, 0 gauge09=FSL_ConcX!SbyADC, 0, 0, 0, 0 gauge10=FSL_ConcX!CompassCoupler_1, 0, 0, 0, 0 gauge11=FSL_ConcX!CompassCoupler_2, 0, 0, 0, 0 gauge12=FSL_ConcX!CouplerSwitch_1, 0, 0, 0, 0 gauge13=FSL_ConcX!CouplerSwitch_2, 0, 0, 0, 0 gauge14=FSL_ConcX!MainCG, 0, 0, 0, 0 gauge15=FSL_ConcX!StbyCG_1, 0, 0, 0, 0 gauge16=FSL_ConcX!StbyCG_2, 0, 0, 0, 0 gauge17=FSL_ConcX!Animations, 0, 0, 0, 0 gauge18=FSL_ConcX!WheelSystem, 0, 0, 0, 0 gauge19=FSL_ConcX!VisorNoseSystem, 0, 0, 0, 0 gauge20=FSL_ConcX!AudioWarning, 0, 0, 0, 0 gauge21=FSL_ConcX!ISCU, 0, 0, 0, 0 gauge22=FSL_ConcX!WLD_1, 0, 0, 0, 0 gauge23=FSL_ConcX!WLD_2, 0, 0, 0, 0 gauge24=FSL_ConcX!FlightControls, 0, 0, 0, 0 gauge25=../civa/CIVAC!Config, 0, 0, 1, 1, Bae_Conc gauge26=../civa/CIVAC!Adeu1, 0, 0, 1, 1 gauge27=../civa/CIVAC!Adeu2, 0, 0, 1, 1 ///////////////////////// // Captain Main Window ///////////////////////// [Window01] file=../Panel Bitmaps/MIP_1600X1200_CPT.bmp file_1024=../Panel Bitmaps/MIP_1600X1200_CPT.bmp size_mm=1600,1200 window_size= 1.000, 1.000 window_pos= 0.000, 0.000 position=0 visible=1 nomove=1 ident=8001 zorder=2 gauge00=FSL_ConcX!Sensor, 0, 0, 4, 4, T1.0 gauge01=FSL_ConcX!AutoLand_CP, 0, 336, 574, 223, F0.80 gauge02=FSL_ConcX!RadIns_CP, 574, 336, 157, 98, F0.80 gauge03=FSL_ConcX!NAVRadio_1, 574, 434, 157, 125 gauge04=FSL_ConcX!AFCS, 731, 375, 869, 192 gauge05=FSL_ConcX!SteeringLight_CP, 0, 559, 112, 119, F0.80 gauge06=FSL_ConcX!AttDev_CP, 0, 678, 122, 170 gauge07=FSL_ConcX!AoAMeter_CP, -27, 848, 57, 303 gauge08=FSL_ConcX!WarningLights_CP, 112, 605, 119, 73, F0.80 gauge09=FSL_ConcX!AircraftDeviationLights_CP, 231, 605, 311, 65, F0.80 gauge10=FSL_ConcX!ASI_CP, 122, 678, 196, 193 gauge11=FSL_ConcX!SbyASI_CP, 32, 871, 138, 143 gauge12=FSL_ConcX!Mach_CP, 171, 871, 146, 143 gauge13=FSL_ConcX!DME_CP, 32,1015, 142, 78 gauge14=FSL_ConcX!RMI_CP, 174,1015, 143, 147 gauge15=FSL_ConcX!ADI_CP, 318, 670, 220, 226 gauge16=FSL_ConcX!HSI_CP, 317, 899, 225, 229 gauge17=FSL_ConcX!VSI_CP, 542, 630, 57, 297 gauge18=FSL_ConcX!RNavLight_CP, 599, 605, 132, 75 gauge19=FSL_ConcX!RadioAlt_CP, 599, 680, 137, 142 gauge20=FSL_ConcX!Alt_CP, 599, 823, 137, 143 gauge21=FSL_ConcX!SbyHorizon, 737, 630, 138, 189 gauge22=FSL_ConcX!TCAS_CP, 737, 820, 138, 148 gauge23=FSL_ConcX!VisorNose, 1356, 630, 252, 153 gauge24=FSL_ConcX!FDSwitch_CP, 542, 968, 138, 51, F0.80 gauge25=FSL_ConcX!INSLights, 680, 968, 142, 47, F0.80 gauge26=FSL_ConcX!ADF_CP, 542,1019, 138, 144 gauge27=FSL_ConcX!Chrono_CP, 680,1015, 142, 147 gauge28=FSL_ConcX!CG_CP, 822, 968, 83, 194 gauge29=FSL_ConcX!ReheatPlacard_CP, 905, 968, 28, 304, F0.80 gauge30=FSL_ConcX!SideSlip_CP, 317,1128, 225, 72 gauge31=FSL_ConcX!Markers_CP, 875, 630, 55, 220, F0.80 gauge32=FSL_ConcX!EngRatingLights_CP, 875, 851, 58, 117, F0.80 gauge33=FSL_ConcX!BrakePressure, 930, 630, 171, 92 gauge34=FSL_ConcX!TOMon_AFCSDim, 1101, 630, 113, 92 gauge35=FSL_ConcX!FuelContents, 1214, 630, 141, 92 gauge36=FSL_ConcX!EngStatus_1, 930, 722, 105, 25 gauge37=FSL_ConcX!EngStatus_2, 1035, 722, 105, 25 gauge38=FSL_ConcX!EngStatus_3, 1140, 722, 105, 25 gauge39=FSL_ConcX!EngStatus_4, 1245, 722, 105, 25 gauge40=FSL_ConcX!N2_1, 933, 747, 102, 103 gauge41=FSL_ConcX!N2_2, 1038, 747, 102, 103 gauge42=FSL_ConcX!N2_3, 1145, 747, 102, 103 gauge43=FSL_ConcX!N2_4, 1250, 747, 102, 103 gauge44=FSL_ConcX!N1_1, 933, 852, 102, 102 gauge45=FSL_ConcX!N1_2, 1038, 852, 102, 102 gauge46=FSL_ConcX!N1_3, 1144, 852, 102, 102 gauge47=FSL_ConcX!N1_4, 1250, 852, 102, 102 gauge48=FSL_ConcX!FuelFlow_1, 933, 958, 102, 103 gauge49=FSL_ConcX!FuelFlow_2, 1039, 958, 102, 103 gauge50=FSL_ConcX!FuelFlow_3, 1144, 958, 102, 103 gauge51=FSL_ConcX!FuelFlow_4, 1249, 958, 102, 103 gauge52=FSL_ConcX!EGT_1, 933,1063, 102, 103 gauge53=FSL_ConcX!EGT_2, 1038,1063, 102, 103 gauge54=FSL_ConcX!EGT_3, 1145,1063, 102, 103 gauge55=FSL_ConcX!EGT_4, 1250,1063, 102, 103 gauge56=FSL_ConcX!NozzleArea_1, 933,1168, 102, 103 gauge57=FSL_ConcX!NozzleArea_2, 1038,1168, 102, 103 gauge58=FSL_ConcX!NozzleArea_3, 1145,1168, 102, 103 gauge59=FSL_ConcX!NozzleArea_4, 1250,1168, 102, 103 gauge60=FSL_ConcX!WheelWarning, 1353, 784, 48, 113 gauge61=FSL_ConcX!GearLever, 1353, 897, 48, 375 gauge62=FSL_ConcX!AoAMeter_FO, 1402, 784, 56, 303 gauge63=FSL_ConcX!GearLights, 1458, 784, 151, 113 gauge64=FSL_ConcX!ICOVOL, 1458, 897, 200, 190 gauge65=FSL_ConcX!AntiSkid, 1401,1087, 121, 185 gauge66=FSL_ConcX!DME_FO, 1522,1086, 142, 78 gauge67=FSL_ConcX!DummyCP_BelowDME_L, 32,1094, 142, 66, T1.0 gauge68=FSL_ConcX!DummyCP_BelowAttDev, 32, 848, 90, 24, T1.0 gauge69=FSL_ConcX!DummyCP_BelowAutoland, 112, 559, 462, 46, T1.0 gauge70=FSL_ConcX!DummyCP_AboveVSI, 542, 605, 57, 25, T1.0 gauge71=FSL_ConcX!DummyCP_BelowVSI, 542, 927, 57, 41, T1.0 gauge72=FSL_ConcX!DummyCP_BelowDME_R, 1522,1164, 142, 107, T1.0 gauge73=FSL_ConcX!DummyCP_BelowAFCS, 731, 567, 878, 63, T1.0 gauge74=FSL_ConcX!DummyCP_BelowNAVRadio, 574, 559, 157, 46, T1.0 gauge75=FSL_ConcX!DummyCP_BelowADF, 542,1163, 254, 110, T1.0 gauge76=FSL_ConcX!DummyCP_BelowAoA, 0,1152, 32, 8, T1.0 gauge77=FSL_ConcX!DummyCP_BelowRMI, 282,1162, 35, 38, T1.0 gauge78=FSL_ConcX!DummyCP_RightOfRNAV, 731, 630, 6, 50, T1.0 // Added last gauge79=FSL_ConcX!CabinAlt_CP, 796,1162, 109, 114, F0.80 ///////////////////////// // Aft Overhead Window ///////////////////////// [Window02] file=../Panel Bitmaps/Overhead_Aft.bmp file_1024=../Panel Bitmaps/Overhead_Aft.bmp background_color=0,0,0 size_mm=1325, 1055 window_size = 0.640716, 0.680206 window_pos = 0.179642, 0.000000 visible=0 nomove=1 ident=8002 zorder=10 gauge00=FSL_ConcX!DummyOH_AftLeft, 0, 0, 88, 1055 gauge01=FSL_ConcX!OH_Aft, 88, 0, 1141, 1055 gauge02=FSL_ConcX!DummyOH_AftRight, 1229, 0, 96, 1055 ///////////////////////// // Fwd Overhead Window ///////////////////////// [Window03] file=../Panel Bitmaps/Overhead_Fwd.bmp file_1024=../Panel Bitmaps/Overhead_Fwd.bmp background_color=0,0,0 size_mm=1325, 496 window_size = 0.640716, 0.319794 window_pos = 0.179642, 0.680206 visible=0 nomove=1 ident=8003 zorder=10 draw_order00=gauge08,gauge07,gauge06,gauge05,gauge04,gauge03,gauge02,gauge01,gauge00 gauge00=FSL_ConcX!DummyOH_LeftEmerShut, 0, 0, 132, 102 gauge01=FSL_ConcX!FireExtSystems, 132, 0, 1056, 102 gauge02=FSL_ConcX!DummyOH_RightEmerShut,1188, 0, 137, 102 gauge03=FSL_ConcX!DummyOH_LeftOfAF, 0, 102, 126, 195 gauge04=FSL_ConcX!ElectronicSystems, 126, 102, 1070, 195 gauge05=FSL_ConcX!DummyOH_RightOfAF, 1196, 102, 129, 195 gauge06=FSL_ConcX!DummyOH_LeftOfVisor, 0, 297, 188, 199 gauge07=FSL_ConcX!LowerLevelControls, 188, 297, 932, 199 gauge08=FSL_ConcX!DummyOH_RightOfVisor, 1120, 297, 205, 199 ///////////////////////// // Throttle Pedestal Window ///////////////////////// [Window05] file=../Panel Bitmaps/ThrottleConsole.bmp file_1024=../Panel Bitmaps/ThrottleConsole.bmp background_color=10,10,10 size_mm=923, 1192 window_size = 0.476264, 0.820000 window_pos = 0.523682, 0.000000 visible=0 nomove=1 ident=8005 zorder=15 draw_order00=gauge08,gauge07 gauge00=../civa/CIVAC!CDU1, 334 ,25 ,1 ,1 gauge01=../civa/CIVAC!CDU1, 335 ,25 ,1 ,1 gauge02=FSL_ConcX!CDU_1, 0 ,0 ,288 ,224 gauge03=FSL_ConcX!DummyUP_Books, 288 ,0 ,347 ,348 gauge04=FSL_ConcX!CDU_2, 634 ,0 ,288 ,224 gauge05=FSL_ConcX!PFIDS, 0 ,224 ,288 ,134 gauge06=FSL_ConcX!DatumControls, 0 ,358 ,288 ,123 gauge07=FSL_ConcX!DummyUP_SELCALLeft, 288 ,348 ,13 ,134 gauge08=FSL_ConcX!SELCAL, 300 ,348 ,321 ,134 gauge09=FSL_ConcX!DummyUP_SELCALRight, 621 ,348 ,12 ,134 gauge10=FSL_ConcX!TAT_UP, 634 ,224 ,289 ,257 gauge11=FSL_ConcX!AudioControls_CP, 0 ,481 ,294 ,210 gauge12=FSL_ConcX!DummyUP_AudioRight, 294 ,481 ,6 ,210 gauge13=FSL_ConcX!DummyUP_AudioLeft, 621 ,481 ,8 ,210 gauge14=FSL_ConcX!AudioControls_FO, 629 ,481 ,294 ,210 gauge15=FSL_ConcX!TrimControls, 0 ,691 ,300 ,501 gauge16=FSL_ConcX!ThrottleControls, 300 ,348 ,321 ,845 gauge17=FSL_ConcX!RightSideControls, 621 ,691 ,302 ,501 ///////////////////////// // Lower Pedestal Window ///////////////////////// [Window06] file=../Panel Bitmaps/LowerPedestal.bmp file_1024=../Panel Bitmaps/LowerPedestal.bmp background_color=10,10,10 size_mm=709,757 window_size = 0.365841, 0.520812 window_pos = 0.634159, 0.479188 visible=0 nomove=1 ident=8006 zorder=15 gauge00=../civa/CIVAC!CDU3, 645 ,750 ,1 ,1 gauge01=FSL_ConcX!VHFRadio_1, 0 ,0 ,330 ,141 gauge02=FSL_ConcX!VHFRadio_2, 330 ,0 ,325 ,141 gauge04=FSL_ConcX!DummyLP_WXRadar, 0 ,141 ,330 ,147 gauge05=FSL_ConcX!ATCXpdr, 0 ,288 ,330 ,128 gauge06=FSL_ConcX!ADFRadios, 0 ,416 ,330 ,148 gauge07=FSL_ConcX!DummyLP_LGearLabel, 0 ,564 ,330 ,43 gauge08=FSL_ConcX!SbyLGear, 0 ,607 ,166 ,150 gauge09=FSL_ConcX!ADCPanel, 166 ,607 ,323 ,150 gauge10=FSL_ConcX!LowerPed_TestSwitches,489 ,607 ,166 ,150 gauge11=FSL_ConcX!CDU_3, 330 ,141 ,325 ,256 gauge12=FSL_ConcX!HFRadios, 330 ,397 ,325 ,210 gauge13=FSL_ConcX!DummyLP_RightSide, 655 ,0 ,54 ,757 ///////////////////////// // DC Electrics Window ///////////////////////// [Window07] file=../Panel Bitmaps/EGC_Lower_1016.bmp file_1024=../Panel Bitmaps/EGC_Lower_1016.bmp background_color=10,10,10 size_mm=1016,1122 window_size= 0.320485, 0.472115 window_pos= 0.679515, 0.2639425 position=7 visible=0 nomove=1 ident=8007 zorder=20 draw_order00=gauge10,gauge09,gauge08,gauge07,gauge06,gauge05,gauge04,gauge03,gauge02,gauge01,gauge00 gauge00=FSL_ConcX!DCElectrics, 0, 0, 1016, 1122 gauge01=FSL_ConcX!DCVolts, 72, 838, 118, 112 gauge02=FSL_ConcX!ACVolts, 824, 838, 118, 112 gauge03=FSL_ConcX!TRU1Load, 82, 376, 118, 128 gauge04=FSL_ConcX!TRU2Load, 304, 376, 118, 128 gauge05=FSL_ConcX!TRU3Load, 544, 376, 118, 128 gauge06=FSL_ConcX!TRU4Load, 762, 376, 118, 128 gauge07=FSL_ConcX!Batt1Amps, 304, 676, 122, 122 gauge08=FSL_ConcX!Batt2Amps, 530, 674, 122, 122 gauge09=FSL_ConcX!CPSFreq, 410, 788, 188, 184 gauge10=FSL_ConcX!KVA, 466, 140, 118, 128 ///////////////////////// // AC Electrics Window ///////////////////////// [Window08] //file=../Panel Bitmaps/EGC_Upper.bmp //file_1024=../Panel Bitmaps/EGC_Upper.bmp //background_color=10,10,10 background_color=0,0,0 size_mm=1200,1089 //window_size= 0.500, 0.630 window_size= 0.378525, 0.458230 window_pos= 0.621475, 0.180 position=7 visible=0 nomove=1 ident=8008 zorder=20 draw_order00=gauge16,gauge15,gauge14,gauge13,gauge12,gauge11,gauge10,gauge09,gauge08,gauge07,gauge06,gauge05,gauge04,gauge03,gauge02,gauge01,gauge00 gauge00=FSL_ConcX!ACElectrics, 0, 0, 1200, 1089 gauge01=FSL_ConcX!CSD1, 165,73,191,174 gauge02=FSL_ConcX!CSD2, 403,73,191,174 gauge03=FSL_ConcX!CSD3, 642,73,191,174 gauge04=FSL_ConcX!CSD4, 881,73,191,174 gauge05=FSL_ConcX!GEN1, 120,388,205,208 gauge06=FSL_ConcX!GEN2, 329,388,205,208 gauge07=FSL_ConcX!GEN3, 628,388,205,208 gauge08=FSL_ConcX!GEN4, 835,388,205,208 gauge09=FSL_ConcX!PTA1, 202,801,80,98 gauge10=FSL_ConcX!PTA2, 395,801,80,98 gauge11=FSL_ConcX!PTA3, 705,801,80,98 gauge12=FSL_ConcX!PTA4, 892,801,80,98 gauge13=FSL_ConcX!CSD1Sw, 250,274,76,176 gauge14=FSL_ConcX!CSD2Sw, 477,274,76,176 gauge15=FSL_ConcX!CSD3Sw, 779,274,76,176 gauge16=FSL_ConcX!CSD4Sw, 989,274,76,176 gauge17=FSL_ConcX!GEN1Sw, 101,583,54,132 gauge18=FSL_ConcX!GEN2Sw, 310,583,54,132 gauge19=FSL_ConcX!GEN3Sw, 634,583,54,132 gauge20=FSL_ConcX!GEN4Sw, 843,583,54,132 ///////////////////////// // Fuel Bottom Window ///////////////////////// [Window09] background_color=0,0,0 size_mm=1298, 1027 window_size= 0.612885, 0.646318 window_pos= 0.19375, 0.353682 visible=0 nomove=1 ident=8009 zorder=20 draw_order00=gauge17,gauge16,gauge15,gauge14,gauge13,gauge12,gauge11,gauge10,gauge09,gauge08,gauge07,gauge06,gauge05,gauge04,gauge03,gauge02,gauge01,gauge00 gauge00=FSL_ConcX!FuelBottom, 0 ,0 ,1298 ,1027 gauge01=FSL_ConcX!Tank1, 34 ,415 ,141 ,141 gauge02=FSL_ConcX!Tank2, 263 ,413 ,141 ,142 gauge03=FSL_ConcX!Tank3, 893 ,409 ,137 ,142 gauge04=FSL_ConcX!Tank4, 1125 ,408 ,137 ,142 gauge05=FSL_ConcX!Tank5, 109 ,106 ,137 ,138 gauge06=FSL_ConcX!Tank6, 109 ,255 ,134 ,138 gauge07=FSL_ConcX!Tank7, 1045 ,102 ,136 ,138 gauge08=FSL_ConcX!Tank8, 1053 ,252 ,134 ,138 gauge09=FSL_ConcX!Tank11, 576 ,530 ,144 ,147 gauge10=FSL_ConcX!FQI, 540 ,73 ,170 ,248 gauge11=FSL_ConcX!Weight, 715 ,250 ,150 ,150 gauge12=FSL_ConcX!Consumed1, 115 ,850 ,145 ,160 gauge13=FSL_ConcX!Consumed2, 279 ,853 ,145 ,160 gauge14=FSL_ConcX!Consumed3, 877 ,848 ,145 ,160 gauge15=FSL_ConcX!Consumed4, 1040 ,846 ,145 ,160 gauge16=FSL_ConcX!Tank11LoadLimit, 589 ,783 ,75 ,45 gauge17=FSL_ConcX!Contents, 563 ,330 ,105 ,60 gauge18=FSL_ConcX!CG_EO, 428 ,63 ,110 ,258 ///////////////////////// // Fuel Top Window ///////////////////////// [Window10] background_color=0,0,0 size_mm=2597, 1124 window_size= 0.612885, 0.353682 window_pos= 0.19375, 0.000 visible=0 nomove=1 ident=8010 zorder=20 draw_order00=gauge07,gauge06,gauge05,gauge04,gauge03,gauge02,gauge01,gauge00 gauge00=FSL_ConcX!FuelTop, 0, 0, 2597, 1124 gauge01=FSL_ConcX!Tank5A, 383, 813, 277, 278 gauge02=FSL_ConcX!Tank7A, 1896, 813, 277, 278 gauge03=FSL_ConcX!Tank9, 1126, 312, 292, 298 gauge04=FSL_ConcX!Tank10, 1122, 791, 292, 298 gauge05=FSL_ConcX!MassFlow, 215, 469, 241, 257 gauge06=FSL_ConcX!FuelTemp, 1659, 24, 288, 293 gauge07=FSL_ConcX!Tank9LoadLimit, 1250, 660, 150, 90 ///////////////////////// // Hydraulics Window ///////////////////////// [Window11] background_color=0,0,0 size_mm=1269, 1291 //window_size= 0.440, 0.580 window_size= 0.400290, 0.543227 window_pos= 0.599710, 0.000 visible=0 nomove=1 ident=8011 zorder=20 gauge00=FSL_ConcX!Hydraulics, 0, 0,1269,1291 gauge01=FSL_ConcX!BlueHydPsi, 808, 1062, 181, 181 gauge02=FSL_ConcX!GreenHydPsi, 161, 1062, 181, 181 gauge03=FSL_ConcX!YellowHydPsi, 487, 1062, 181, 181 gauge04=FSL_ConcX!BlueHydQty, 892, 369, 186, 186 gauge05=FSL_ConcX!GreenHydQty, 226, 368, 186, 186 gauge06=FSL_ConcX!YellowHydQty, 558, 368, 186, 186 gauge07=FSL_ConcX!HydTemp, 570, 757, 109, 107 ///////////////////////// // Air Bleed Window ///////////////////////// [Window12] background_color=0,0,0 size_mm=1343, 1548 //window_size= 0.440, 0.640 window_size= 0.315288, 0.484553 window_pos= 0.450, 0.000 position=7 visible=0 nomove=1 ident=8012 zorder=20 gauge00=FSL_ConcX!AirBleed, 0, 0, 1343, 1548 gauge01=FSL_ConcX!BleedPsi1, 69, 359, 198, 195 gauge02=FSL_ConcX!BleedPsi2, 478, 358, 198, 195 gauge03=FSL_ConcX!BleedPsi3, 690, 358, 198, 195 gauge04=FSL_ConcX!BleedPsi4, 1114, 358, 198, 195 gauge05=FSL_ConcX!BleedTemp1, 86, 1383, 140, 137 gauge06=FSL_ConcX!BleedTemp2, 398, 1383, 140, 137 gauge07=FSL_ConcX!BleedTemp3, 713, 1383, 140, 137 gauge08=FSL_ConcX!BleedTemp4, 1027, 1383, 140, 137 ///////////////////////// // Temperature Control Window ///////////////////////// [Window13] background_color=0,0,0 size_mm=1266, 1707 //window_size= 0.380, 0.640 window_size= 0.297212, 0.534324 window_pos= 0.600, 0.000 position=7 visible=0 nomove=1 ident=8013 zorder=20 gauge00=FSL_ConcX!TempCtrl, 0, 0, 1266, 1707 gauge01=FSL_ConcX!TempCtrlSel1, 0, 1420, 280, 285 gauge02=FSL_ConcX!TempCtrlSel2, 298, 1429, 280, 285 gauge03=FSL_ConcX!TempCtrlSel3, 603, 1428, 280, 285 gauge04=FSL_ConcX!TempCtrlSel4, 909, 1426, 280, 285 gauge05=FSL_ConcX!TempInd1, 18, 1152, 236, 238 gauge06=FSL_ConcX!TempInd2, 470, 1155, 236, 238 gauge07=FSL_ConcX!TempInd3, 928, 1152, 236, 238 gauge08=FSL_ConcX!TempMassFlow1, 14, 732, 238, 238 gauge09=FSL_ConcX!TempMassFlow2, 322, 732, 238, 238 gauge10=FSL_ConcX!TempMassFlow3, 627, 732, 238, 238 gauge11=FSL_ConcX!TempMassFlow4, 934, 732, 238, 238 gauge12=FSL_ConcX!TempCAU1, 22, 424, 238, 238 gauge13=FSL_ConcX!TempCAU2, 323, 424, 238, 238 gauge14=FSL_ConcX!TempCAU3, 627, 424, 238, 238 gauge15=FSL_ConcX!TempCAU4, 935, 424, 238, 238 ///////////////////////// // Engine Control Panel ///////////////////////// [Window14] background_color=0,0,0 size_mm=1350, 1156 //window_size= 0.395686, 0.369324 window_size= 0.318597, 0.353682 window_pos= 0.161132, 0.394373 visible=0 nomove=1 ident=8014 zorder=20 gauge00=FSL_ConcX!EngCtrl, 0, 0, 1350, 1156 gauge01=FSL_ConcX!SecNozzle1, 686, 702, 142, 138 gauge02=FSL_ConcX!SecNozzle2, 828, 702, 142, 138 gauge03=FSL_ConcX!SecNozzle3, 970, 702, 142, 138 gauge04=FSL_ConcX!SecNozzle4, 1112, 702, 142, 138 ///////////////////////// // Secondary Engine Controls ///////////////////////// [Window15] background_color=0,0,0 size_mm=1216, 1755 //window_size= 0.300, 0.555 window_size= 0.318597, 0.646318 window_pos= 0.161132, 0.353682 visible=0 nomove=1 ident=8015 zorder=20 gauge00=FSL_ConcX!SecEngInst, 0, 0, 1216, 1755 gauge01=FSL_ConcX!FuelPress, 740, 1375, 260, 245 gauge02=FSL_ConcX!TCA1, 73, 336, 265, 256 gauge03=FSL_ConcX!TCA2, 338, 336, 265, 256 gauge04=FSL_ConcX!TCA3, 603, 336, 265, 256 gauge05=FSL_ConcX!TCA4, 868, 336, 265, 256 gauge06=FSL_ConcX!OilPress1, 73, 591, 265, 256 gauge07=FSL_ConcX!OilPress2, 338, 591, 265, 256 gauge08=FSL_ConcX!OilPress3, 603, 591, 265, 256 gauge09=FSL_ConcX!OilPress4, 868, 591, 265, 256 gauge10=FSL_ConcX!OilTemp1, 73, 845, 265, 256 gauge11=FSL_ConcX!OilTemp2, 338, 845, 265, 256 gauge12=FSL_ConcX!OilTemp3, 603, 845, 265, 256 gauge13=FSL_ConcX!OilTemp4, 868, 845, 265, 256 gauge14=FSL_ConcX!P7_1, 73, 1101, 265, 256 gauge15=FSL_ConcX!P7_2, 338, 1101, 265, 256 gauge16=FSL_ConcX!P7_3, 603, 1101, 265, 256 gauge17=FSL_ConcX!P7_4, 868, 1101, 265, 256 gauge18=FSL_ConcX!SEIALT, 647, 169, 188, 76 gauge19=FSL_ConcX!SEITEMP, 383, 166, 188, 76 gauge20=FSL_ConcX!SEIMACH, 120, 166, 188, 76 ///////////////////////// // Intakes Window ///////////////////////// [Window16] background_color=0,0,0 size_mm=615, 1755 //window_size= 0.148, 0.555 window_size= 0.161132, 0.646318 window_pos= 0.000, 0.353682 visible=0 nomove=1 ident=8016 zorder=20 gauge00=FSL_ConcX!Intakes, 0, 0, 615, 1755 gauge01=FSL_ConcX!IntakeRamp1, 55, 1237, 114, 114 gauge02=FSL_ConcX!IntakeRamp2, 182, 1237, 114, 114 gauge03=FSL_ConcX!IntakeRamp3, 309, 1237, 114, 114 gauge04=FSL_ConcX!IntakeRamp4, 439, 1237, 114, 114 gauge05=FSL_ConcX!SpillDoor1, 55, 1471, 114, 114 gauge06=FSL_ConcX!SpillDoor2, 182, 1471, 114, 114 gauge07=FSL_ConcX!SpillDoor3, 314, 1471, 114, 114 gauge08=FSL_ConcX!SpillDoor4, 442, 1471, 114, 114 //////////////////////////// // Engineer Fwd Leg Window //////////////////////////// [Window17] file=../Panel Bitmaps/FwdLeg.bmp file_1024=../Panel Bitmaps/FwdLeg.bmp background_color=10,10,10 size_mm=1823, 1772 window_size= 0.546161, 0.707842 window_pos= 0.000, 0.292158 visible=0 nomove=1 ident=8017 zorder=20 gauge00=FSL_ConcX!EngStartPanel, 0, 0, 615, 1035 gauge01=FSL_ConcX!MSU_1, 0, 1035, 615, 160 gauge02=FSL_ConcX!FireSensors, 0, 1195, 615, 577 gauge03=FSL_ConcX!FuelVent, 616, 0, 604, 470 gauge04=FSL_ConcX!MSU_3, 616, 470, 604, 160 gauge05=FSL_ConcX!OxygenMask, 616, 630, 604, 680 gauge06=FSL_ConcX!RATPanel, 616, 1310, 604, 462 gauge07=FSL_ConcX!DoorPanel, 1220, 0, 603, 470 gauge08=FSL_ConcX!MSU_2, 1220, 470, 604, 160 gauge09=FSL_ConcX!AudioControls_EO, 1220, 630, 604, 900 gauge10=FSL_ConcX!LGearFaults, 1220, 1530, 604, 242 gauge20=../civa/CIVAC!MSU1, 1820, 1770, 1, 1 gauge21=../civa/CIVAC!MSU2, 1820, 1770, 1, 1 gauge22=../civa/CIVAC!MSU3, 1820, 1770, 1, 1 //////////////////////////// // Engineer Aft Leg Window //////////////////////////// [Window18] file=../Panel Bitmaps/AftLeg.bmp file_1024=../Panel Bitmaps/AftLeg.bmp background_color=10,10,10 size_mm=1016, 1683 window_size= 0.320485, 0.707842 window_pos= 0.679515, 0.292158 visible=0 nomove=1 ident=8018 zorder=20 gauge00=FSL_ConcX!AIDS, 0, 0, 515, 642 gauge01=FSL_ConcX!CompassControl, 0, 641, 515, 347 gauge02=FSL_ConcX!DummyEO_OxygenPanel,0, 987, 515, 696 gauge03=FSL_ConcX!EngOvhtTest, 514, 0, 502, 350 gauge04=FSL_ConcX!AFCSITEM, 514, 349, 502, 293 gauge05=FSL_ConcX!CVR, 514, 1043, 502, 177 gauge06=FSL_ConcX!DummyEO_SecMon, 514, 1219, 502, 464 gauge07=FSL_ConcX!FireExtPress, 514, 641, 502, 403 //////////////////////////// // Nozzzle Override Window //////////////////////////// [Window19] file=../Panel Bitmaps/NozzleOverride.bmp file_1024=../Panel Bitmaps/NozzleOverride.bmp background_color=10,10,10 size_mm=1016, 414 window_size= 0.320485, 0.174203 window_pos= 0.679515, 0.60 visible=0 nomove=1 ident=8019 zorder=20 gauge00=FSL_ConcX!Eng_TAT, 0, 0, 1016, 414 //////////////////////////// // Brake Control Window //////////////////////////// [Window20] file=../Panel Bitmaps/BrakeControls.bmp file_1024=../Panel Bitmaps/BrakeControls.bmp background_color=10,10,10 size_mm=615, 2316 //window_size= 0.45, 0.635 window_size= 0.161132, 0.852919 window_pos= 0.000, 0.000 visible=0 nomove=1 ident=8020 zorder=20 gauge00=FSL_ConcX!HydCheckout, 0, 619, 615, 315 gauge01=FSL_ConcX!BrakeControl, 0, 934, 615, 1012 gauge02=FSL_ConcX!BrakeTemp, 197, 1678, 225, 225 gauge03=FSL_ConcX!Chrono_EO, 35, 938, 390, 395 gauge04=FSL_ConcX!PressureRatio, 0, 1945, 615, 317 gauge05=FSL_ConcX!BrakeTotalPSI, 38, 1331, 267, 266 gauge06=FSL_ConcX!DummyEO_BrakeControlSpkr, 0, 0, 615, 619 //////////////////////////// // Cabin Pressure Window //////////////////////////// [Window21] file=../Panel Bitmaps/CabinPressurePanel.bmp file_1024=../Panel Bitmaps/CabinPressurePanel.bmp background_color=10,10,10 size_mm=1350, 1289 window_size= 0.318597, 0.394373 window_pos= 0.161132, 0.000 visible=0 nomove=1 ident=8021 zorder=20 gauge00=FSL_ConcX!CabinPress, 0, 0, 1350, 1322 gauge01=FSL_ConcX!ClimbRate, 562, 1064, 226, 226 gauge02=FSL_ConcX!CabinAlt, 243, 630, 230, 230 gauge03=FSL_ConcX!CabinDiff, 878, 625, 235, 235 gauge04=FSL_ConcX!DischValvePos, 555, 575, 243, 400 gauge05=FSL_ConcX!AltSelect1, 120, 915, 375, 385 gauge06=FSL_ConcX!AltSel |
|
Title: Re: Need help from the developers Post by mark767 on Sep 14th, 2011, 1:37am Someone on the ConcordeX forums suggested I remove all modules from the dll.xml file and when I did this the keyboard entry worked again. So I have narrowed it down through trial and error to the FSCopilot DLL. Now this DLL was at the top of the list and I remember that it was also causing problems for the Level D 767 so I moved it to the bottom of the list but it still did not work. If I take it out, no problem, put it back and it does not work. I even reinstalled FSInn and FSCopilot. I have just moved to a new computer so I check my old FSX setup on my old system (Win XP) and FSCopilot is there also below the FSLabs Dll's and on my old system it worked just fine. Hopefully you have a suggestion of where to go from here (please don't say use SB4). Mark. |
|
Title: Re: Need help from the developers Post by mark767 on Sep 14th, 2011, 11:42am OK, its confirmed. Another person has tried FSInn/Copilot with CIVA INS and confirmed that the keyboard entry will not work. This seems to be only with Windows7 as I had it working before with Windows XP. Any ideas ? Mark. |
|
Title: Re: Need help from the developers Post by Gianfranco Corrias on Sep 14th, 2011, 5:31pm Mark767, in your panel .cfg there are some very strange parameters. All gauge parameters of [window00] are 0,0,0,0 except the civa gauges. gauge25=../civa/civac!config,0,0,1,1, Bae_Conc it should be: gauge25=../civa/civac!config,0,0,0,0,Bae_Conc than always in the [window00] you have : gauge26=../civa/civac!Adeu1,0,0,1,1 gauge27=../civa/civac!Adeu2,0,0,1,1 it does mean that your Adeu dimensions are 1pixel x 1pixel and their positions are coincident: one Adeu over the other. On the [window05] you have: gauge00=../civa/civac!cdu1,334,25,1,1 gauge01=../civa/civac!cdu1,335,25,1,1 the same on [window06] for the gauge00 related to the cdu3. Here also there are some unbelievable parameters First you have two cdu1 and none cdu2. I think that the gauge01 should be: gauge01=../civa/civac!cdu2,335,25,1,1 Your CDUs dimensions are 1pixel x 1 pixel unbelievable because your CDUs are too small and not readable. Marco and me after having checked the INS source code we do confirm that in the civa ins the keyboard led is ONLY green.There isn't any yellow led. I noticed that there is in your panel.cfg another INS: the FSL_ConcX INS. [window05] gauge02=FSL_ConcX!CDU_1, 0, 0, 288, 224 gauge04=FSL_ConcX!CDU_2, 634,0,288,224 [window06] gauge11=FSL_ConcX!CDU_3, 330,141,325,256 moreover in your panel on [window17] gauge01=FSL_ConcX!MSU1,0,1035,615,160 gauge08=FSL_ConcX!MSU2,1220,470,604,160 gauge04=FSL_ConcX!MSU3,616,470,604,160 In the [window 17] there are also the civa MSU gauges but FS9 cannot read these gauges because their numbers are not in correct sequence.Anyway the gauge dimensions get the civa gauges useless because unreadable. Maybe the yellow led is related to the FSL_ConcX INS and you can be sure that these CDUs&MSUs aren't civa INS. Because these FSL_ConcX CDUs&MSUs have coherent parameters and the civa ones are useless,unreadable and not coherent I think that you are now not using civa ins but you're using the FSL_ConcX ins. regards Gianfranco |
|
Title: Re: Need help from the developers Post by vololiberista on Sep 15th, 2011, 3:19pm As said, the keyboard light is green. I have a different Concorde to you but nevertheless you can see the number and types of CIVA gauges you should have:- vololiberista Code:
|
|
Title: Re: Need help from the developers Post by mark767 on Sep 16th, 2011, 2:02am It is very possible that we are in fact using the ConcordeX INS guage but somehow it is related back to your ins gauges. In fact part of the ConcordeX install process is to have the user download and install your guages. This is way over my head so I will need to get the ConcordeX guys to look at this thread. Mark. |
|
Title: Re: Need help from the developers Post by Gianfranco Corrias on Sep 16th, 2011, 4:24pm Go to ask help to ConcX we do not like and cannot loose our time for ConcX troubles. Gianfranco |
|
Title: Re: Need help from the developers Post by mark767 on Sep 16th, 2011, 11:36pm I did, they say it is an issue with FSInn. Mark. |
|
SIMUFLY.COM Discussion Forums » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |