SIMUFLY.COM Discussion Forums - HNAC A306F Panel V3.2

tmeliher Forum Member Offline Posts: 7	HNAC A306F Panel V3.2 Jun 8^th, 2008, 7:47pm I want to instal Civa INS for this aircrafts panel please help me!
Back to top	IP Logged

Gianfranco Corrias Member Offline Posts: 261 Gender:	Re: HNAC A306F Panel V3.2 Reply #1 - Jun 9^th, 2008, 7:03pm hi, what kind of plane is HNAC A306F? Gianfranco
Back to top	IP Logged

tmeliher Forum Member Offline Posts: 7	Re: HNAC A306F Panel V3.2 Reply #2 - Jun 9^th, 2008, 7:53pm It hasn't got FMC it was old series Airbus. I'm flying VOR to Vor but I can't pass the ocenic. I need a INS system and look Civa it good I think? But I can't understand install manual. Hnac is wonderfull aircraft and it's so good I think. Please help me sir...
Back to top	IP Logged

Gianfranco Corrias Member Offline Posts: 261 Gender:	Re: HNAC A306F Panel V3.2 Reply #3 - Jun 11^th, 2008, 1:24pm Please post your panel.cfg Gianfranco
Back to top	IP Logged

Adrian19 Forum Member Offline Posts: 6 France Gender:	Re: HNAC A306F Panel V3.2 Reply #4 - Jun 14^th, 2008, 3:19am Are you sure you're using HNAC Panel V3.2 ? I ask because it has a limited function FMC that uses the FS fltpln for its waypoints, no reason why you can't cross the Atlantic with it. I believe also that the Autopilot is custom made, so may not be compatible with CIVA. Regards ............Adrian W.
Back to top	« Last Edit: Jun 14^th, 2008, 3:22am by Adrian19 » IP Logged

tmeliher

Forum Member

Offline

Posts: 7

Re: HNAC A306F Panel V3.2
Reply #5 - Jun 19^th, 2008, 8:59am

Adrian19 wrote on Jun 14^th, 2008, 3:19am:

Are you sure you're using HNAC Panel V3.2 ? I ask because it has a limited function FMC that uses the FS fltpln for its waypoints, no reason why you can't cross the Atlantic with it.
I believe also that the Autopilot is custom made, so may not be compatible with CIVA.

Regards
............Adrian W.

It's work only the FS9 flight planner and I'm not insert the NAT routes with it. It's not so good and it cant be work true...

Quote:

Please post your panel.cfg

Here there thank you for help; and please explane how I install?

----- Panel cfg. for A300-600 -----

Date: 29th of December 2004

This Panel was exclusively built for HNAC A300-600. No support for use in other A300 / A310 (except HNAC) is given.
Aircraft + cfg. / Flightdynamics and this Panel are "one unit", so there can be problems, when used in other aircraft.

Credits:

Paul Golding - for leaving us the cockpit side views
Arne Bartels - for the Sendview gauge
Hans Hartmann - for the Trimreset gauge
M.B. @ LHT - for all technical information and documentaion
Martin Jüngel - for technical data
Douglas D. Dawson - for the Sound gauge
All other We forgot to mention....

----------------------------------------------

[Window Titles]
Window00=Mainpanel
Window01=Nightlights
Window02=RMI
Window03=Pedestal
Window04=FMC\NAV-Radios
Window05=Cutoff Levers
Window06=Ground Service Panel
Window07=Minipanel
Fixed Window34=Overhead
Fixed Window35=Forward Right
Fixed Window36=Right
Fixed Window37=Rear Right
Fixed Window38=Rear
Fixed Window39=Rear Left
Fixed Window40=Left
Fixed Window41=Forward Left
Fixed Window42=Passenger View Fwd Up R
Fixed Window43=Passenger View Fwd Up L
Fixed Window44=Passenger View Side Up R
Fixed Window45=Passenger View Side Up L
Fixed Window46=Passenger View Rear Up R
Fixed Window47=Passenger View Rear Up L

[VIEWS]
VIEW_FORWARD_WINDOWS=MAIN_PANEL,180,10002,THROTTLE_PANEL,GPS_PANEL,COMPASS_PANEL
,10010,MINIPANEL
VIEW_FORWARD_ZOOM=0.750
VIEW_FORWARD_DIR=3.800, 0.000, 0.000

VIEW_FORWARD_RIGHT_WINDOWS=35
VIEW_FORWARD_RIGHT_ZOOM=0.800
VIEW_FORWARD_RIGHT_DIR=6.000, 0.000, 45.000

VIEW_RIGHT_WINDOWS=36
VIEW_RIGHT_ZOOM=0.800
VIEW_RIGHT_DIR=5.000, 0.000, 90.000

VIEW_REAR_RIGHT_WINDOWS=37
VIEW_REAR_RIGHT_ZOOM=0.800
VIEW_REAR_RIGHT_DIR=3.000, 0.000, 135.000

VIEW_REAR_WINDOWS=38

VIEW_REAR_LEFT_WINDOWS=39
VIEW_REAR_LEFT_ZOOM=0.800
VIEW_REAR_LEFT_DIR=3.000, 0.000, 225.000

VIEW_LEFT_WINDOWS=40
VIEW_LEFT_ZOOM=0.800
VIEW_LEFT_DIR=5.000, 0.000, 270.000

VIEW_FORWARD_LEFT_WINDOWS=41
VIEW_FORWARD_LEFT_ZOOM=0.800
VIEW_FORWARD_LEFT_DIR=6.000, 0.000, 315.000

---------------------------------------------------- Wing and engine views --------------------------------------------------

VIEW_FORWARD_RIGHT_UP_WINDOWS=42
VIEW_FORWARD_RIGHT_UP_ZOOM=0.750
VIEW_FORWARD_RIGHT_UP_EYE=2.300, 0.200, -10.500 (-Left/+Right, +Up/-Down, +fwd/-aft)
VIEW_FORWARD_RIGHT_UP_DIR=19.000, 0.000, 130.000

VIEW_FORWARD_LEFT_UP_WINDOWS=43
VIEW_FORWARD_LEFT_UP_ZOOM=0.750
VIEW_FORWARD_LEFT_UP_EYE=-1.000, 0.200, -10.500
VIEW_FORWARD_LEFT_UP_DIR=19.000, 0.000, 230.000

VIEW_RIGHT_UP_WINDOWS=44
VIEW_RIGHT_UP_ZOOM=0.750
VIEW_RIGHT_UP_EYE=2.300, 0.200, -14.500
VIEW_RIGHT_UP_DIR=12.000, 0.000, 130.000

VIEW_LEFT_UP_WINDOWS=45
VIEW_LEFT_UP_ZOOM=0.750
VIEW_LEFT_UP_EYE=-1.000, 0.200, -14.500
VIEW_LEFT_UP_DIR=12.000, 0.000, 230.000

VIEW_REAR_RIGHT_UP_WINDOWS=46
VIEW_REAR_RIGHT_UP_ZOOM=0.750
VIEW_REAR_RIGHT_UP_EYE=1.800, 0.200, -25.500
VIEW_REAR_RIGHT_UP_DIR=12.000, 0.000, 90.000

VIEW_REAR_LEFT_UP_WINDOWS=47
VIEW_REAR_LEFT_UP_ZOOM=0.750
VIEW_REAR_LEFT_UP_EYE=-0.500, 0.200, -25.500
VIEW_REAR_LEFT_UP_DIR=12.000, 0.000, 270.000

VIEW_DOWN_WINDOWS=34
VIEW_DOWN_DIR=-18.000, 0.000, 0.000

//--------------------------------------------------------
[Window00]
file=a310_main.bmp
size_mm=1024
window_size_ratio=1.000
position=7
visible=1
ident=MAIN_PANEL
nomenu=0
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

gauge00=A306!stby_ASI, 0,375,97,97 // stby. Airspeed Indicator
gauge01=A306!alt, 293,418,91,92 // Main Altimeter
gauge02=A306!RMI, 0,477,93,119 // DDRMI
gauge03=A306!VSI, 290,512,98,98 // Vertical Speed Indicator
gauge04=A306!SFPI300, 588,372,82,82 // Slat Flap Pos.Indicator A300-600
gauge05=A306!stby_adi, 493,374,81,81 // stby. ADI
gauge06=A306!stby_alt_F, 485,467,94,94 // stby. Altimeter/feet
gauge07=A306!brake_press, 584,466,61,61 // Brake Pressure Indicator
gauge08=A306!memo, 500,589,177,177 // Left ECAM Display (MEMO)
gauge09=A306!PFD_AB6, 109,372 // Primary Flight Display (PFD/A300-600)
gauge10=A306!ND, 108,567,164,162 // Navigation Display (ND)
gauge11=A306!ADF, 294,615,89,89 // ADF Indicator
gauge12=A306!MKR, 421,408,23,23 // Marker Warning Light
gauge13=A306!toggles, 6,605,64,46 // Toggles Switches
gauge14=A306!reverse, 696,362,124,12 // Reverser Indication Lights
gauge15=A306!Warn, 297,387,57,25 // Master Warning System
gauge16=A306!STATUS, 842,589,177,177 // Right ECAM Display (Status Pages)
gauge17=A306!CF6-80C2A3, 837,426,89,137 // TRP for GE CF6-80C2A3 Engines
gauge18=A306!gear, 928,469,55,85 // Gear Lever
gauge19=A306!gear_light, 931,384,66,40 // Gear Status Lights
gauge20=A306!autobrake, 585,465,101,107 // Auto Brake Selection Panel
gauge21=A306!REG, 162,338,57,14 // Aircraft Registration Plate above PFD
gauge22=A306!LdgElev, 828,373,96,51 // Landing Elevation Selection
gauge23=A306!hdg_att, 3,660,42,24 // ATT/HDG Src Transfer Switch
gauge24=A306!clock, 389,516 // Clock and Timer
gauge25=A306!Alt_M, 389,435,72,72 // Metric Altimeter
gauge26=A306!FloodBRT, 240,287,51,17 // Brightnesscontrol of Flood Lightning
gauge27=A306!glareshield, 343,210,681,119 // Complete Glareshield Panel
gauge28=A306!eng_warn, 688,729,137,36 // Engine Warning Lights
gauge29=A306!toggle_cutoff, 722,721,68,19 // fuel Cut Off switches (below Engine Gauges)
gauge30=Trimreset!TRIM, 0,0,10,10 // Auto Trim Reset (Thanks to Hans Hartmann)
//gauge31=fpda_a330_callout, 0,0,0 // ALT Callout
gauge32=A306!glare_sw, 766,327,22,22 // Glareshield Integral Lightning Switch
//------------------------------------------------------------------------------
-----------------------------------------------
// System Gauges - do not change anything here!

gauge33=A306!light_manager, 0,0,1,1 // Panel Light Controler
gauge34=A306!FMC_Server300, 0,0,1,1 // FMC Data A300-600
gauge35=A306!load, 0,0,1,1 // -----
gauge36=A306!data, 0,0,1,1 // -----
gauge37=SendView!SendView,0,0,1,1,window00 // View Indication (Credits for this Gauge go to Arne Bartels)
gauge38=dsd_xml_sound3!dsd_xml_sound3, 2,2,5,5, ./Sound/HNAC/A300_sound.ini // Sound gauge (Credits for this Gauge go to Doug Dawson)

//------------------------------------------------------------------------------
-----------------------------------------------
// GE Layout orange Displays

gauge39=A306!N1_1, 689,384,65,65 // N1 L orange Display
gauge40=A306!N1_2, 761,384,65,65 // N1 R orange Display
gauge41=A306!EGT_1, 690,450,65,65 // EGT L orange Display
gauge42=A306!EGT_2, 762,450,65,65 // EGT R orange Display
gauge43=A306!N2_1, 690,522,65,65 // N2 L orange Display
gauge44=A306!N2_2, 762,522,65,65 // N2 R orange Display
gauge45=A306!FF_1, 690,593,65,65 // FF/FU L orange Display
gauge46=A306!FF_2, 762,593,65,65 // FF/FU R orange Display
gauge47=A306!OIL_1, 690,661,65,65 // Oil L orange Display
gauge48=A306!OIL_2, 762,661,65,65 // Oil R orange Display

//--------------------------------------------------------
[Window01]
Background_color=0,0,0
size_mm=1024,768
window_size_ratio=1.000
position=0
visible=1
ident=180
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

gauge00=A306!light_main_HNAC, 0,0,1024,768 // Light Control for Main Panel
gauge01=A306!Gaugecontroler, 0,0,1024,768 // Gauge & Clickspot Control
gauge02=A306!toggle_cutoff, 722,726,68,19 // fuel Cut Off switches (below Engine Gauges)

draw_order00=gauge00, gauge01, gauge02

//--------------------------------------------------------
[Window02]
file=a310_rmi.bmp
size_mm=193,234
window_size_ratio=1.000
position=7
visible=1
ident=10002
nomenu=0
window_size= 0.188, 0.305
window_pos= 0.000, 0.610

gauge00=A306!RMI, 12,0,180,226 // Enlargement of DDRMI

//--------------------------------------------------------
[Window03]
file=A310_pedestal.bmp
file_1024=A310_pedestal.bmp
size_mm=1024
window_size_ratio=1.000
position=0
visible=1
ident=THROTTLE_PANEL
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//gauge00=A306!Throttle_A300, 424,-96,512,512
gauge00=A306!Throttle_A300, 424,0,512,512
gauge01=A306!ecam, 573,586,225,79
gauge02=A306!r_com1, 337,418,230,106
gauge03=A306!r_com2, 801,418,230,106
gauge04=A306!r_xpndr, 569,419,231,95
gauge05=A306!ECAM_SGU, 571,528,228,56
gauge06=A306!Trim, 571,665,230,103
gauge07=A306!audio1, 337,526,230,182
gauge08=A306!audio2, 800,523,226,186

//--------------------------------------------------------
[Window04]
file=A310_pedestal_1.bmp
file_1024=A310_pedestal_1.bmp
size_mm=685,428
window_size_ratio=1.000
position=8
visible=1
ident=GPS_PANEL

gauge00=A306!FMC, 2,0,268,434
gauge01=A306!r_nav, 271,222,414,193

//--------------------------------------------------------
[Window05]
file=A310_cutoff.bmp
size_mm=133,67
window_size_ratio=1.000
position=7
visible=1
ident=10010
window_size= 0.140, 0.087
window_pos= 0.670, 0.913

gauge00=A306!cutoff, 0,0,133,67

//--------------------------------------------------------
[Window06]
file=a310_gnd.bmp
size_mm=274,187
window_size_ratio=1.000
position=7
visible=0
ident=10020

gauge00=A306!gnd, 0,0,274,187

//--------------------------------------------------------
[Window07]
file=a310_mini.bmp
size_mm=591,199
position=7
visible=1
ident=MINIPANEL
render_3d_window=1
nomenu=1

gauge00=A306!PFD_AB6, 115,19,160,165
gauge01=A306!ND, 316,20,162,162
gauge02=A306!alt, 3,107,89,89
gauge03=A306!VSI, 496,100,98,98

//--------------------------------------------------------

[Fixed Window34]
file=A310_ovhd.bmp
size_mm=1024,768
position=7
visible=0
ident=34
render_3d_window=0
nomenu=0
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

gauge00=A306!apu, 512,603,238,66
gauge01=A306!damper, 269,448,247,65
gauge02=A306!electric, 271,73,239,377
gauge03=A306!ext_lights, 271,511,240,209
gauge04=A306!fuel, 509,139,242,312
gauge05=A306!lighttest, 748,616,245,106
gauge06=A306!ov_starter, 511,522,237,153
gauge07=A306!press, 14,81,20,20
gauge08=A306!signs, 21,458,252,270
gauge09=A306!wiper_con, 510,663,246,61
gauge10=A306!pneumatics, 750,69,240,609
gauge11=A306!hydraulic, 30,74,239,375
gauge12=A306!togglec_oh, 0,0,19,19
gauge13=A306!irs1, 34,40,234,62
gauge14=A306!irs2, 274,16 ,234,62
gauge15=A306!irs3, 753,16,234,62
gauge16=A306!isdu, 513,0,233,141
gauge17=A306!fuel_qty, 513,459,233,62

//--------------- Cockpit Side View Bitmaps --------------
//--------------------------------------------------------
[Fixed Window35]
file=pg.a310.r45.bmp
position=7
visible=0
ident=35
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window36]
file=pg.a310.r90.bmp
position=7
visible=0
ident=36
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window37]
file=pg.a310.r135.bmp
position=7
visible=0
ident=37
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window38]
file=pg.a310.r180.bmp
position=7
visible=0
ident=38
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window39]
file=pg.a310.l135.bmp
position=7
visible=0
ident=39
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window40]
file=pg.a310.l90.bmp
position=7
visible=0
ident=40
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window41]
file=pg.a310.l45.bmp
position=7
visible=0
ident=41
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//------------ Windows For Dynamic Wingviews -------------

//--------------------------------------------------------
[Fixed Window42]
file=a310_window_L.bmp
position=7
visible=0
ident=42
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window43]
file=a310_window_R.bmp
position=7
visible=0
ident=43
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window44]
file=a310_window_L.bmp
position=7
visible=0
ident=44
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window45]
file=a310_window_R.bmp
position=7
visible=0
ident=45
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window46]
file=a310_window_R.bmp
position=7
visible=0
ident=46
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

//--------------------------------------------------------
[Fixed Window47]
file=a310_window_L.bmp
position=7
visible=0
ident=47
render_3d_window=1
nomenu=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

[Color]
Day=255,255,255
Night=1,1,1
Luminous=235,200,155

[Default View]
X=0
Y=0
SIZE_X=8191
SIZE_Y=2115

Back to top

IP Logged

Gianfranco Corrias Member Offline Posts: 261 Gender:	Re: HNAC A306F Panel V3.2 Reply #6 - Jun 21^st, 2008, 11:05am attached your panel .cfg and the related .bmp. In the [window 00] you have to find the positions where you like the gauges 50,51,52,53,will be located. This panel.cfg part should be copied and pasted into the whole one.
Back to top	Multimedia file viewing and clickable links are available for registered members only!! You need to Login or Register!! « Last Edit: Jun 21^st, 2008, 11:10am by Gianfranco Corrias » IP Logged

tmeliher Forum Member Offline Posts: 7	Re: HNAC A306F Panel V3.2 Reply #7 - Jun 21^st, 2008, 6:17pm Thank you I can install the INS panel but ı have got alot of problems... 1) INS lights can't be open? Maybe gauge problem but I can install again and again... 2) At the night time I can't see the INS panel because this is too dark...
Back to top	« Last Edit: Jun 21^st, 2008, 6:21pm by tmeliher » IP Logged

Gianfranco Corrias Member Offline Posts: 261 Gender:	Re: HNAC A306F Panel V3.2 Reply #8 - Jun 21^st, 2008, 6:41pm when the plane is at ramp the INS has its own simulated electric GP and in this situation the INSs are surely illuminated. Before you leave the ramp you have to connect the engine generators to the plane electric system to power the INSs. Gianfranco
Back to top	« Last Edit: Jun 21^st, 2008, 6:42pm by Gianfranco Corrias » IP Logged

tmeliher Forum Member Offline Posts: 7	Re: HNAC A306F Panel V3.2 Reply #9 - Jun 21^st, 2008, 9:10pm Thank you I'm fixed it but this time INS can't be control the aircraft... Multimedia file viewing and clickable links are available for registered members only!! You need to Login or Register!!
Back to top	« Last Edit: Jun 21^st, 2008, 9:19pm by tmeliher » IP Logged

Gianfranco Corrias

Member

Offline

Posts: 261

Gender: male

Re: HNAC A306F Panel V3.2
Reply #10 - Jun 22^nd, 2008, 8:32am

hi,
if after having switched on the NAV MODE SELECTOR the choised INS doesn't control the plane possible causes are:
1-the autopilot isn't in HDG SELECTOR MODE.
or
2-the autopilot of your plane is a custom autopilot and cannot work with the Civa INS.
or
3-there are present ACTION&MALFUNCTION CODES(03 not associated with red WARN LIGHT).In this case the INS is working in BAT mode because the plane electric system isn't powered by the engine generators or the connection INS-Autopilot is failed.See the abnormal procedure check list.
Gianfranco

Back to top

IP Logged

tmeliher Forum Member Offline Posts: 7	Re: HNAC A306F Panel V3.2 Reply #11 - Jun 22^nd, 2008, 12:52pm Multimedia file viewing and clickable links are available for registered members only!! You need to Login or Register!! Looking check list but I can't understand...
Back to top	IP Logged

Gianfranco Corrias Member Offline Posts: 261 Gender:	Re: HNAC A306F Panel V3.2 Reply #12 - Jun 22^nd, 2008, 5:19pm set the INS DATA SELECTOR on DSRTK/STS and looking at right display push the TEST switch as required to clean codes and switch off the WARN LT. You have also to read the manual because your INS acknowledgement is too poor! Gianfranco
Back to top	IP Logged

tmeliher Forum Member Offline Posts: 7	Re: HNAC A306F Panel V3.2 Reply #13 - Jun 22^nd, 2008, 6:56pm Himmm undestand sir... You are right my INS Library is too poor but I can read all manuals and learn every thing thanks for help...
Back to top	IP Logged

	Welcome, Guest. Please Login or Register
	News: The forum time is GMT/UTC, you can set your local time accessing the personal Profile menu