Welcome, Guest. Please Login or Register
Simufly.com
  News:
Please, register and enjoy discussing on Aviation and Flight Simulation with us
  HomeHelpSearchLoginRegister
 
ADC cards (Read 93 times)
MustanGrande
Forum Member
*
Offline



Posts: 3

ADC cards
Feb 16th, 2011, 7:31pm
 
After a bit of searching, I've been unable to find reliable step-by-step instructions when it comes to using ADEU cards in conjunction with ADC cards for automatic DME updating.  Which cards are loaded first, and does the ADC card need to be reloaded when changing ADEU cards?  I'm using a CS 707 with only one INS unit, so multi-console procedures won't work for me.
Back to top
 
 
View Profile   IP Logged
vololiberista
Member
**
Offline



Posts: 59

Gender: male
Re: ADC cards
Reply #1 - Feb 17th, 2011, 6:35pm
 
The short answer is no, you only need to load the *.adc card once along with the first  *.awc(waypoint) card. As soon as the respective VOR/DME comes within range do the update on your CDU. It's as simple as that. The correct procedure is properly explained in the CIVA manuel and is the reliable step by step instruction you have been searching for!!!!!
vololiberista
Back to top
 
« Last Edit: Feb 17th, 2011, 6:37pm by vololiberista »  
View Profile   IP Logged
MustanGrande
Forum Member
*
Offline



Posts: 3

Re: ADC cards
Reply #2 - Feb 18th, 2011, 8:43pm
 
So, say I'm flying a flight with 2 sets of waypoint cards.  I should load the first AWC, followed by the ADC.  When I'm on the final leg of that card, I should switch to the second AWC card, but don't need to load the ADC card again.  Is that correct?
Back to top
 
 
View Profile   IP Logged
vololiberista
Member
**
Offline



Posts: 59

Gender: male
Re: ADC cards
Reply #3 - Feb 19th, 2011, 2:44pm
 
Correct!
vololiberista
Back to top
 
 
View Profile   IP Logged
MustanGrande
Forum Member
*
Offline



Posts: 3

Re: ADC cards
Reply #4 - Feb 19th, 2011, 6:30pm
 
Alright.  Thank you very much!
Back to top
 
 
View Profile   IP Logged